Porcelian Veneers San Ramon

Porcelain Veneers San Ramon Dentist

Porcelain Veneers (sometimes called porcelain veneers or dental porcelain laminates) are wafer-thin, custom-made shells of tooth-colored materials designed to cover the front surface of teeth to improve your appearance. These shells are bonded to the front of the teeth changing their color, shape, size, or length.

Porcelain Veneers  can be made from porcelain or from resin composite materials. Porcelain Veneers resist stains better than resin veneers and better mimic the light reflecting properties of natural teeth. Resin veneers are thinner and require removal of less of the tooth surface before placement. You will need to discuss the best choice of veneer material for you with San Ramon Dentist Dr. Paul Fillet.

What’s the Procedure for Getting a Dental Veneer?

Getting a Porcelain Veneers usually requires three trips our San Ramon Dental Office – one for a consultation and two to make and apply the veneers. One tooth or many teeth can simultaneously undergo the veneering process described below.

  • Diagnosis and treatment planning. This first step involves your active participation. Explain to San Ramon Dentist Dr. Paul Fillet the result that you are trying to achieve. During this appointment, your dentist will examine your teeth to make sure dental veneers are appropriate for you and discuss what the procedure will involve and some of its limitations.San Ramon Dentist Dr. Paul Fillet will take X-rays and possibly make impressions of your mouth and teeth.
  • Preparation. To prepare a tooth for a Porcelain Veneers, Dr. Fillet will remove about 1/2 millimeter of enamel from the tooth surface, which is an amount nearly equal to the thickness of the Porcelain Veneers to be added to the tooth surface. Before trimming off the enamel, you and your dentist will decide the need for a local anesthetic to numb the area. Next, he will make a model or impression of your tooth. This model is sent out to a dental laboratory, which in turn constructs your veneer. It usually takes 1-2 weeks for your dentist to receive the veneers back from the laboratory. For very unsightly teeth, temporary dental veneers can be placed for an additional cost.
  • Bonding. Before the Porcelain Veneers is permanently cemented to your tooth, Dr. Fillet will temporarily place it on your tooth to examine its fit and color. He repeatedly remove and trim the veneer as needed to achieve the proper fit; the veneer color can be adjusted with the shade of cement to be used. Next, to prepare your tooth to receive the veneer, your tooth will be cleaned, polished, and etched — which roughens the tooth to allow for a strong bonding process. A special cement is applied to the veneer and the veneer is then placed on your tooth. Once properly position on the tooth, San Ramon Dentist Dr. Paul Fillet will apply a special light beam to the dental veneer, which activates chemicals in the cement, causing it to harden or cure very quickly. The final steps involve removing any excess cement, evaluating your bite and making any final adjustments in the veneer as necessary. San Ramon Dentist Dr. Paul Fillet may ask you to return for a follow-up visit in a couple of weeks to check how your gums are responding to the presence of your veneer and to once again examine the veneer’s placement.